Integrated BIM tools, including Revit, AutoCAD, and Civil 3D
Professional CAD/CAM tools built on Inventor and AutoCAD
Connect pedestrian walkways to the train stands in your InfraWorks Mobility Simulation model.
Type:
Tutorial
Length:
3 min.
Transcript
00:03
In InfraWorks, once you have created a scheduled train service for your multimodal simulation model,
00:09
you need to add and connect pedestrian walkways,
00:12
so that people can access the stands, or platforms, and be picked up by the train service.
00:18
Begin in an open InfraWorks Mobility Simulation model with a scheduled train service already configured.
00:25
In the project space, zoom in to the train stand along the lower railway segment in this example.
00:31
To add a walkway that people use to travel to and from this platform, right-click and select Walkway > New Walkway at Cursor.
00:40
In the New Walkway dialog, click OK.
00:44
Back in the project space, the new walkway appears and is actively selected.
00:49
Press ESC.
00:51
Select the walkway, then pick and drag the end handles to adjust its angle, length, and position, so that it can easily connect to the train stand.
01:01
To make the connection, again, select the end handle of the walkway, and then select the end of the train stand.
01:08
In the model space, right-click and select Walkway > New Connection to Stand.
01:14
InfraWorks Mobility Simulation connects the walkway to the platform
01:18
and creates streams that pedestrians in the simulation will walk down to access each of the 10 doors previously set for the train stand.
01:26
Next, on the other end of the walkway, create a pedestrian area where people will be arriving from.
01:33
Adjust the view so that the end handle is centered in the viewport a little past the cursor.
01:39
Then, right-click and select Area > New Area at Cursor.
01:44
A new pedestrian area appears, and the walkway is highlighted, confirming that it is properly embedded within the pedestrian area.
01:52
Repeat the same process to add a walkway connected to the platform along the top section of the railway.
01:59
Note that once a walkway is placed and streams added,
02:04
if you need to adjust the location, you can still select and move the end of the walkway.
02:08
All the pedestrian streams adjust to the new location.
02:12
Finally, follow the previous steps to add a second pedestrian area.
02:16
Again, ensure that the walkway appears highlighted, confirming a proper connection.
02:22
Zoom out to see the completed train network.
02:25
You are now ready to add people to your multimodal model in InfraWorks Mobility Simulation.
Video transcript
00:03
In InfraWorks, once you have created a scheduled train service for your multimodal simulation model,
00:09
you need to add and connect pedestrian walkways,
00:12
so that people can access the stands, or platforms, and be picked up by the train service.
00:18
Begin in an open InfraWorks Mobility Simulation model with a scheduled train service already configured.
00:25
In the project space, zoom in to the train stand along the lower railway segment in this example.
00:31
To add a walkway that people use to travel to and from this platform, right-click and select Walkway > New Walkway at Cursor.
00:40
In the New Walkway dialog, click OK.
00:44
Back in the project space, the new walkway appears and is actively selected.
00:49
Press ESC.
00:51
Select the walkway, then pick and drag the end handles to adjust its angle, length, and position, so that it can easily connect to the train stand.
01:01
To make the connection, again, select the end handle of the walkway, and then select the end of the train stand.
01:08
In the model space, right-click and select Walkway > New Connection to Stand.
01:14
InfraWorks Mobility Simulation connects the walkway to the platform
01:18
and creates streams that pedestrians in the simulation will walk down to access each of the 10 doors previously set for the train stand.
01:26
Next, on the other end of the walkway, create a pedestrian area where people will be arriving from.
01:33
Adjust the view so that the end handle is centered in the viewport a little past the cursor.
01:39
Then, right-click and select Area > New Area at Cursor.
01:44
A new pedestrian area appears, and the walkway is highlighted, confirming that it is properly embedded within the pedestrian area.
01:52
Repeat the same process to add a walkway connected to the platform along the top section of the railway.
01:59
Note that once a walkway is placed and streams added,
02:04
if you need to adjust the location, you can still select and move the end of the walkway.
02:08
All the pedestrian streams adjust to the new location.
02:12
Finally, follow the previous steps to add a second pedestrian area.
02:16
Again, ensure that the walkway appears highlighted, confirming a proper connection.
02:22
Zoom out to see the completed train network.
02:25
You are now ready to add people to your multimodal model in InfraWorks Mobility Simulation.
How to buy
Privacy | Do not sell or share my personal information | Cookie preferences | Report noncompliance | Terms of use | Legal | © 2025 Autodesk Inc. All rights reserved
Sign in for the best experience
Save your progress
Get access to courses
Receive personalized recommendations
May we collect and use your data?
Learn more about the Third Party Services we use and our Privacy Statement. May we collect and use your data to tailor your experience?
Explore the benefits of a customized experience by managing your privacy settings for this site or visit our Privacy Statement to learn more about your options.