Design coordination for AEC projects using the Autodesk Construction Cloud

Course overview

Analyze and promote coordination compliance using company-wide data including assurance of early and frequent spatial, quality, and safety coordination. Learn how to use the Autodesk Construction Cloud to coordinate projects across the entire project.

You should be able to:

Setup Model Coordination and review automatic clash detection.
Track and resolve issues in Model Coordination and Revit.
Package Revit Publish Sets to share with other teams in Design Collaboration.

Course downloads

These downloadable resources will be used to complete modules in this course:

Course outline

30 min.

Model coordination setup and automated clash review in Autodesk Construction Cloud

Before you can review models for clashes in the Autodesk Construction Cloud, you must set up the coordination space. This module teaches you how to properly set up the project coordination space and review clashes against multiple project models simultaneously. You will also learn how to address the clash issues, once they are found.

Module outline

Before you can review models for clashes in the Autodesk Construction Cloud, you must set up the coordination space. This module teaches you how to properly set up the project coordination space and review clashes against multiple project models simultaneously. You will also learn how to address the clash issues, once they are found.

This module takes approximately 30 minutes to complete. By the end of the module, you should be able to:

Create coordination spaces
Review active clashes
Address clash issues

Before you start

Please make sure you have the BIM Collaborate software loaded and installed.
If you have technical difficulties, please reach out to product support.

About the Author

This module was created by Deepak Maini.

‌

35 min.

Track and resolve clash issues using Model Coordination on ACC and Revit

In this module, you will learn how to download Model Coordination issues inside Revit, edit clashing elements to resolve clashes, and then publish and share the updated models to review the resolved clashes.

Module outline

In this module, you will learn how to download Model Coordination issues inside Revit, edit clashing elements to resolve clashes, and then publish and share the updated models to review the resolved clashes.

This module takes approximately 35 minutes to complete. By the end of the module, you should be able to: