Integrated BIM tools, including Revit, AutoCAD, and Civil 3D
Professional CAD/CAM tools built on Inventor and AutoCAD
Create a customized report to view information about specific fields.
Type:
Tutorial
Length:
9 min.
Tutorial resources
These downloadable resources will be used to complete this tutorial:
Transcript
00:04
Info.
00:04
Water Pro provides many ways to view and analyze
00:07
different types of simulation outputs such as tabular reports,
00:10
graphical reports,
00:12
map displays,
00:14
animation
00:15
contours and annotations.
00:18
You can save time by using the customized report manager to
00:21
create a customized report and save the format for later use
00:26
to begin.
00:27
Double click the desired project dot APR X file to open RCIS
00:31
Pro.
00:33
Once the project starts click the info Water pro tab to open the info Water Pro ribbon
00:39
in the project panel, click initialize
00:43
in this exercise.
00:44
You create a customized pipe report,
00:46
save the custom field collection list and then recall that list in another report
00:51
in the model explorer on the command center tab, expand the tools folder
00:56
and then double click customized report manager.
00:59
This opens a three step wizard in which you can
01:02
select the input and output data for your customized report.
01:07
In the step one, define data source page, expand the element type,
01:11
drop down and set it to pipe
01:14
in the input data group, deselect geometry data
01:18
in the output data group set output range information of two velocity.
01:24
Click next
01:27
in the step two define display fields, page,
01:29
click the remove all fields icon to move all options to the available fields.
01:33
List
01:36
note that since you turned off geometry data in step one,
01:39
there is now no geometry data available in the step two fields,
01:44
press and hold control and multi select these available fields.
01:48
Pipe id,
01:50
pipe zone,
01:52
pipe material,
01:54
pipe hide diameter,
01:56
output velocity
01:58
output head loss,
01:60
range max value
02:01
and range max time.
02:04
Click the add icon to add your selections to the display fields list.
02:10
Next, use the move up and move down buttons to reorder the display fields list.
02:14
So they appear as follows
02:16
pipe id,
02:18
pipe hide diameter
02:20
range max value range max time pipe zone
02:24
pipe material
02:26
output velocity
02:28
output head loss,
02:30
click save to save this collection of display fields. In this order
02:35
in the field collection dialogue, click new
02:38
and in the pop-up, enter a new id of pipe underscore velocity
02:42
and then click, OK,
02:45
then click. Yes to confirm
02:48
the pipe velocity field collection file is saved and ready to be used
02:53
back in the customized report manager.
02:55
Click next to move to the step three defined display scope page
03:00
for this exercise. Leave these options as they are and then click finish.
03:06
The report is open for all pipes. In the report manager,
03:09
it displays the custom field selection as headings across the top of the table.
03:13
In the order that you set.
03:15
This report can also be open for a domain or for features satisfying a query,
03:21
view the report and then click hide to close the report manager.
03:26
Return to the customized report manager
03:29
in the model explorer on the command center tab,
03:32
expand the tools folder and then double
03:35
click customized report manager to reopen the wizard
03:39
on the step one, define data source page, set the element type to pipe.
03:44
Click next
03:46
on the step two page,
03:48
click the open icon to select your previously saved field collection table
03:52
in the field collection, dialogue, select pipe velocity and then click OK.
03:57
The display fields list populates with the fields saved in your collection.
04:02
This saves you time because now you do not
04:04
need to reelect and reorder the needed fields.
04:07
Click next and then finish to view the report
04:11
when you are finished. Click hide to close the report manager.
Video transcript
00:04
Info.
00:04
Water Pro provides many ways to view and analyze
00:07
different types of simulation outputs such as tabular reports,
00:10
graphical reports,
00:12
map displays,
00:14
animation
00:15
contours and annotations.
00:18
You can save time by using the customized report manager to
00:21
create a customized report and save the format for later use
00:26
to begin.
00:27
Double click the desired project dot APR X file to open RCIS
00:31
Pro.
00:33
Once the project starts click the info Water pro tab to open the info Water Pro ribbon
00:39
in the project panel, click initialize
00:43
in this exercise.
00:44
You create a customized pipe report,
00:46
save the custom field collection list and then recall that list in another report
00:51
in the model explorer on the command center tab, expand the tools folder
00:56
and then double click customized report manager.
00:59
This opens a three step wizard in which you can
01:02
select the input and output data for your customized report.
01:07
In the step one, define data source page, expand the element type,
01:11
drop down and set it to pipe
01:14
in the input data group, deselect geometry data
01:18
in the output data group set output range information of two velocity.
01:24
Click next
01:27
in the step two define display fields, page,
01:29
click the remove all fields icon to move all options to the available fields.
01:33
List
01:36
note that since you turned off geometry data in step one,
01:39
there is now no geometry data available in the step two fields,
01:44
press and hold control and multi select these available fields.
01:48
Pipe id,
01:50
pipe zone,
01:52
pipe material,
01:54
pipe hide diameter,
01:56
output velocity
01:58
output head loss,
01:60
range max value
02:01
and range max time.
02:04
Click the add icon to add your selections to the display fields list.
02:10
Next, use the move up and move down buttons to reorder the display fields list.
02:14
So they appear as follows
02:16
pipe id,
02:18
pipe hide diameter
02:20
range max value range max time pipe zone
02:24
pipe material
02:26
output velocity
02:28
output head loss,
02:30
click save to save this collection of display fields. In this order
02:35
in the field collection dialogue, click new
02:38
and in the pop-up, enter a new id of pipe underscore velocity
02:42
and then click, OK,
02:45
then click. Yes to confirm
02:48
the pipe velocity field collection file is saved and ready to be used
02:53
back in the customized report manager.
02:55
Click next to move to the step three defined display scope page
03:00
for this exercise. Leave these options as they are and then click finish.
03:06
The report is open for all pipes. In the report manager,
03:09
it displays the custom field selection as headings across the top of the table.
03:13
In the order that you set.
03:15
This report can also be open for a domain or for features satisfying a query,
03:21
view the report and then click hide to close the report manager.
03:26
Return to the customized report manager
03:29
in the model explorer on the command center tab,
03:32
expand the tools folder and then double
03:35
click customized report manager to reopen the wizard
03:39
on the step one, define data source page, set the element type to pipe.
03:44
Click next
03:46
on the step two page,
03:48
click the open icon to select your previously saved field collection table
03:52
in the field collection, dialogue, select pipe velocity and then click OK.
03:57
The display fields list populates with the fields saved in your collection.
04:02
This saves you time because now you do not
04:04
need to reelect and reorder the needed fields.
04:07
Click next and then finish to view the report
04:11
when you are finished. Click hide to close the report manager.
InfoWater Pro provides many ways to view and analyze different types of simulation outputs, such as tabular reports, graphical reports, map displays, animation, contours, and annotations. You can save time by using the Customized Report Manager to create a customized report and save the format for later use.
This opens a three-step wizard in which you can select the input and output data for your customized report.
The pipe velocity field collection file is saved and ready to be used.
The report is opened for all pipes in the Report Manager. It displays the custom field selection as headings across the top of the table, in the order that you set.
To select and open the saved field collection table you just created:
The Display Fields list populates with the fields saved in your collection. This saves you time since you do not need to re-select and reorder the needed fields.
How to buy
Privacy | Do not sell or share my personal information | Cookie preferences | Report noncompliance | Terms of use | Legal | © 2025 Autodesk Inc. All rights reserved
Sign in for the best experience
Save your progress
Get access to courses
Receive personalized recommendations
May we collect and use your data?
Learn more about the Third Party Services we use and our Privacy Statement. May we collect and use your data to tailor your experience?
Explore the benefits of a customized experience by managing your privacy settings for this site or visit our Privacy Statement to learn more about your options.