Create a setup in Fusion for milling
Create a Setup, select the machine type, operation type, machining plane, Work Coordinate System (WCS) and the define the stock boundary.
What we cover in this video
- Creating a Setup is the most important first step.
- Selecting a Machine Type.
- Selecting the Operation Type (Milling, Turning, Additive, Cutting).
- Setting the machining plane.
- Setting the Work Coordinate System (WCS) Origin.
- Finding the stock size.
- Adding a program number or comment.
From the Milling tab, select Setup > New Setup 
.
The most common mistake people make, is having the wrong work plane. Be sure the axes are pointing in the correct direction. Please see the parameter Tool Tips for detailed information.
The Work Coordinate System (WCS): It's important that we tell Fusion which face we want to machine. You can set the Orientation to any plane by picking a face and an edge. The XY axis should lay flat on the machining plane. The Z+ axis should point away from the machining plane. For our example, we can leave it set to Model Orientation.
Set The Origin: For the Origin (Zero Point) you can pick from the Stock box or the Model box. Select a point from the Stock Box Point. It should look similar to the picture shown below (Upper left corner of the block in the XY plane).
