Open and save a Fusion drawing

In this activity, you will locate, open and save a Fusion drawing.

Prerequisites

• Fusion is started.
• Data file location: Samples > Basic Training > 08 - Drawings > Connector_Joint_Drawing.

Steps

1. Save the Drawing.

   With the Connector_Joint_Drawing design open, do the following:

   1. If the drawing is "Read Only" (indicated in the title bar), click File > Save As.

      Note: Even if a drawing is not "Read Only," you may wish to use the Save As command to preserve the original version of the drawing.

   2. Optional: Create a new Project to store your training drawings and models. Click + Project to do so, specify the project name, and press Enter. After a short pause, the new project becomes the active project, and a blank file list appears on the right side of the Save dialog.

   3. Optional: Create a new folder within the project to store your training drawings and models. Click + Folder to do so, specify a folder name, and press Enter. Double-click the new folder to make it the current file saving location.

   4. Click Save.

Activity 1 summary

In this activity, you:

• Located and saved the drawing to a personal folder.

Related pages

• Tutorial: Annotating a drawing