Use Partner Cards to Pull in Project Data​

Any referenced datasets can be downloaded from "Module downloads" in the module overview.

Use Partner Cards to Pull in Project Data – Practice Exercise

Task 1: Add Partner Cards to the Custom Dashboard

  1. From the left navigation on the Insight page, click the custom dashboard you created in the first practice exercise. 
  2. From the top right, click Customize. 
  3. Click the Card Library button. 
  4. From the FILTERS section, click Partner Cards; only the partner cards are displayed, as shown below:



  5. Select the partner cards you want to display on your dashboard. 
  6. From the bottom right, click Add Cards. 
  7. Drag and drop the partner cards on the dashboard to locate them, as shown below:



  8. Click Configure on one of the partner cards. 
  9. Edit the card title if required. 
  10. In the Partner URL field, paste the URL from the partner application. 
  11. Click Save. 
  12. Repeat this process for the other partner cards you added to your dashboard. The figure below shows the ESRI card added and configured:

Using Partner Cards to Pull in Project Data – Questions

Required for course completion

3 questions

The title of a branded partner card cannot be changed.

(Select one)
Select an answer

To add a 3rd Party card, you need to have what kind of embed link?

(Select one)
Select an answer

To pull in the analytics from any branded partner, you need their permission to add their Card to the dashboard.

(Select one)
Select an answer

3/3 questions left unanswered

Was this information helpful?