Learning

Home

Catalog

Certification

Certification overview

Architecture, Engineering & Construction

Design & Manufacturing

Media & Entertainment

Support & Policies

My dashboard

Learning

Home

Catalog

Certification

My dashboard

Module quiz

8 questions

How can you fix an issue with uneven chamfers along the Y-axis during the visual inspection process?

(Select one)

Change tool offset height.
Add a small negative value to the G55 Y-axis work offset.
Increase spindle speed.
Tighten the jaws on the vice even more.

Select an answer

What is the tolerance set for the Piston bore feature being probed in this video?

(Select one)

0.005
0.010
0.008
0.002

Select an answer

What is the required name for the dimension capturing the distance between the mounting face and where the brake pad will be seated?

(Select one)

Brake pad clearance
Pad face depth
Mounting depth
Piston face depth

Select an answer

When manual inspections are defined, where can they be found in the Browser of the Manufacture workspace?

(Select one)

In the NC Programs tab.
In a folder of the associated setup requiring inspections.
In a folder under the top-level component.
In the Named Views folder of the top-level component.

Select an answer

Which type of probe is selected from the Fusion probes library?

(Select one)

MP 300
MP 100
OMP 400
OSP 200

Select an answer

If a tolerance is not listed next to a dimension in a detailed drawing, where should the tolerance value be obtained from?

(Select one)

Title block notes with overall tolerances.
There is no tolerance, so set range to 0.
Next closest dimension with a tolerance.
Setup sheet associated with active setup.

Select an answer

What tolerance is set for the center-to-center distance between the two holes in the manual inspection setup?

(Select one)

± 0.10
± 0.05
± 0.01
± 0.02

Select an answer

How should inspection notes be added to a file in Fusion 360?

(Select one)

Manufacture workspace > Inspection > Manual > Create Manual Inspection.
Manufacture workspace > Inspection > Probing > Probe WCS.
Design workspace > Inspect > Measure.
Design workspace > Comment.

Select an answer

8/8 questions left unanswered