Start your final test

Ready to test your knowledge? Pass this required test with a score of 75% or more to complete the course and earn a certificate of completion. 

You'll earn a certificate of completion each time you pass a skill-builder course. Find your recognitions on My Dashboard.

Final test

Required for course completion

29 questions

Which type of view is the first view created in a detailed drawing?

(Select one)
Select an answer

What is an efficient way a setup can be reused to machine multiple parts at different locations on the same machine?

(Select one)
Select an answer

Which of the following is not information contained in a tool library?

(Select one)
Select an answer

A design that is ready for manufacturing must contain which of the following?

(Select one)
Select an answer

What type of work holding is created to hold custom machined parts and replace the hardened jaws on a vise?

(Select one)
Select an answer

How are part numbers and descriptions modified to be displayed in a Parts List for an assembly drawing?

(Select one)
Select an answer

What setting can affect the appearance of certain drawing symbols, such as Surface Texture, when used in detailed drawings?

(Select one)
Select an answer

How can tools in the Fusion 360 sample library be used in a local or cloud library?

(Select one)
Select an answer

A custom drawing template can contain which of the following drawing elements?

(Select one)
Select an answer

In addition to numerical inputs, what else can CAM expressions be based on?

(Select one)
Select an answer

Which coordinate system will a toolpath pattern use unless specified?

(Select one)
Select an answer

Which of the following Colorization options in the Simulate tool can be used to show a different color for each tool used?

(Select one)
Select an answer

How can a CAM expression be used across multiple operations with different parameter values?

(Select one)
Select an answer

How does a rigid tapping toolpath remove the tap from a hole?

(Select one)
Select an answer

When creating a Center Mark Pattern, how can a preview of the pattern be seen?

(Select one)
Select an answer

Which Inspect drop-down tool helps identify a required tool diameter limit?

(Select one)
Select an answer

What is a fixture as it relates to machining?

(Select one)
Select an answer

When are machine configurations selected?

(Select one)
Select an answer

During tool creation which tab contains information about the tool number?

(Select one)
Select an answer

If you want to dictate the location where a 2D Contour toolpath begins cutting, which setting should be explored?

(Select one)
Select an answer

Which analysis tool can help find undercuts in a design that would require a special tool?

(Select one)
Select an answer

Which 2D Face option in the Passes tab will adjust the tool direction during tool entry?

(Select one)
Select an answer

Which operation option allows a toolpath to account for previously machined areas?

(Select one)
Select an answer

What is the primary characteristic of a chip breaking cycle in a Drill operation?

(Select one)
Select an answer

When does a secondary setup need to be created?

(Select one)
Select an answer

Which 2D milling operation can be used on holes if an appropriate drill bit is not available or if higher tolerances need to be held?

(Select one)
Select an answer

What drawing element gets created automatically when a Parts List is inserted?

(Select one)
Select an answer

Which mode option during the simulation of toolpaths allows the user to view the traces of the tool motion from the last position after it has moved?

(Select one)
Select an answer

Where are model adjustments such as the removal of chamfers made for production?

(Select one)
Select an answer

29/29 questions left unanswered

Was this information helpful?