Learning

Home

Catalog

Certification

Certification overview

Architecture, Engineering & Construction

Design & Manufacturing

Media & Entertainment

Support & Policies

My dashboard

Learning

Home

Catalog

Certification

My dashboard

Module quiz

5 questions

What happens to a suppressed toolpath when an NC program is posted to G-code?

(Select one)

It does not get posted to G-code.
It gets posted to G-code but commented out.
It gets posted to G-code.
It gets posted to G-code with an optional stop before it.

Select an answer

With default colorization on a stock comparison simulation, what does the color red indicate?

(Select one)

Too much material has been removed.
The toolpath federate was exceeded.
Stock model was not loaded.
Not enough material has been removed.

Select an answer

How are comments such as tools used or toolpath names displayed in G-code when using a HAAS NGC post configuration?

(Select one)

Comments are displayed in ( ).
Comments are displayed with %.
Comments are displayed with a C before them.
Comments are not displayed.

Select an answer

How is a suppressed toolpath displayed in an NC program?

(Select one)

The toolpath name is in bold text.
The toolpath name is highlighted.
The toolpath name has a line through it.
The toolpath name is not listed.

Select an answer

What information can you gather from this line of code “N65 G0 Z0.2”?

(Select one)

The spindle is moved to the coordinate Z 0.2 at the cutting federate.
The spindle is moved up 0.2 away from its current position at a cutting feedrate.
The spindle is moved up 0.2 away from its current position at a rapid feedrate.
The spindle is moved to the coordinate Z 0.2 at the rapid feedrate.

Select an answer

5/5 questions left unanswered