Which of the following workflows can be used to modify the length of a sample tool in the Fusion 360 library?

(Select one)

Use Derive to create a derived model of the sample tool and modify its geometry in the Design workspace
Copy the tool into a custom library and modify its Cutter properties
Double-click the sample tool and modify its Cutter properties
Export the tool as a .f3d file and modify the geometry in the Design workspace

Select an answer

How can a user obtain the most accurate information about the proper settings for sample machines in the Fusion 360 Machine Library?

(Select one)

Use the Simulation workspace to test the performance of the machine and obtain the recommended settings
Access the machine configuration on the manufacturer’s website to obtain recommended settings
Import a CAD model of the machine from the manufacturer and Fusion 360 will automatically determine the recommended settings
The settings in the Fusion 360 Machine Library are always accurate and do not need to be modified

Select an answer

For a part that requires multiple Setup configurations each with different WCS locations, what should be done to include all setups in a single NC Program?

(Select one)

Parts containing multiple Setups and different WCS locations cannot be posted in a single NC Program
Toggle Multiple WCS Offsets on for each Setup
Increment the WCS Offset for each subsequent Setup WCS location
Increment the Program Name/Number value for each subsequent Setup WCS location

Select an answer

One important advantage of creating a distributed design is:

(Select one)

Being able to work in offline mode
Shortening the time it takes to open a file
Bringing in geometry from other designs to be re-used for creating new features
Minimizing the number of files

Select an answer

Which of the following is the best use case for a Multi-Axis Swarf toolpath?

(Select one)

Instances where a cavity in the part needs to be cleared out with the tip of the tool
Instances where the part needs to be machined with the side of the tool
Instances where material from the top of the stock to the top of the model needs to be removed with the base of the tool
Instances where a hole needs to be made with the tip of the tool

Select an answer

How does the Wrap Toolpath functionality work in a 2D Adaptive Clearing operation for a cylinder?

(Select one)

Enabling the Wrap Toolpath functionality turns the operation into a 3D Adaptive Clearing operation
2D Adaptive Clearing does not support Wrap Toolpath functionality because it requires multi-axis motion
A Coil body is automatically generated based on the selected geometry and the operation generates a toolpath to machine the entire coil body
It creates a flat 2D Adaptive Clearing operation based on the selected geometry and wraps it around the cylindrical part

Select an answer

How can machining operations best be reorganized in the Browser?

(Select one)

Rename the operations to be in the desired order
Place an insertion marker and use Move/Copy
Delete all the operations and recreate them in the proper order
Drag and drop them into the desired order

Select an answer

What is the advantage of increasing the Forward Tilt for a Multi-Axis Contour operation?

(Select one)

Applying a forward tilt increases the load on the tool tip and produces a cleaner cut
Forward tilt can only be controlled in a Multi-Axis Swarf operation, not in Multi-Axis Contour
Applying a forward tilt reduces the load on the tip and performs the cut faster
Applying a forward tilt reduces the load on the tool tip and produces a cleaner cut

Select an answer

Which of the following is true of tools in the Fusion 360 Sample library?

(Select one)

The tools are not based on real data and should not be used
The tools are for demo purposes only and cannot be used in machining operations
A CAD model of the tool must be uploaded to the project directory to use it in a machining operation
The tools are read-only

Select an answer

When defining stock in a new Setup, Fusion 360 creates default stock dimensions that are:

(Select one)

Large enough to enclose all bodies and components selected as the Model in the Setup tab
Large enough to enclose all bodies and components selected as the Fixture in the Setup tab
Dependent on the file size
Large enough to enclose all bodies and components in the Design Window

Select an answer

What does a WCS Offset of 2 indicate in an NC Program with a HAAS or FANUC controller?

(Select one)

G54
G53
G55
G19

Select an answer

When configuring a Multi-Axis Rotary operation, which Style of rotary passes will move the tool along the rotary axis to remove material?

(Select one)

There is no such option for a Rotary operation
Spiral
Line
Circular

Select an answer

How can design history be enabled in an imported model?

(Select one)

Design history cannot be enabled in imported models
Locate the file in the Data Panel and click the version number
Right-click the top-level component and select Capture Design History
Right-click the top-level component and select Export

Select an answer

When setting up a workholding, what must be applied to replicate mechanical motion?

(Select one)

Joints
Appearances
Stock
Materials

Select an answer

Which of the following is an option when using the Derive command?

(Select one)

Break Link
New Drawing from Design
Create New Design
Add to Current Design

Select an answer

Which of the following parameter values need to be modified for each Setup to be able to Post Process more than one CAM setup at a time?

(Select one)

Program Comment
WCS Offset
Stock Offset Mode
Program Name/Number

Select an answer

Which of the following is a valid mode to select geometry for a Multi-Axis Swarf operation?

(Select one)

Point at Edge and Plane
Contour Pairs
Silhouette Surface
Point Through Two Edges

Select an answer

When simulating toolpaths in the Manufacture workspace, which Stock Colorization option will display a different color for the toolpath associated with each individual operation?

(Select one)

Operation
Tool
Material
Comparison

Select an answer

Before a tool can be created and stored in the cloud, which of the following must be done first?

(Select one)

Restart Fusion 360 without an internet connection to clear existing cloud libraries
The tool’s CAD model must be uploaded to the project folder in the Data Panel
Cloud Libraries must be enabled under User > Preferences
Save the file in the Samples directory of the Data Panel

Select an answer

Where can the NC Program command be found?

(Select one)

In the 2D dropdown menu
In the Multi-Axis dropdown menu
In the Actions dropdown menu
In the Setup dropdown menu

Select an answer

When creating a toolpath pattern for a set of rotary position operations on a machine with rapid tool changes and slow A-axis movement, which Operation Order should be selected in the Pattern dialog?

(Select one)

Order by operation
Optimize order
Order by tool
Preserve order

Select an answer

What is the purpose of a derived toolpath?

(Select one)

To export the toolpath to a new design file
To apply selections and common parameters to a new toolpath type
To create a template of the selected toolpath that gets saved to the Data Panel
To create an exact copy of the selected toolpath

Select an answer

Where are Setup Sheets created from an NC Program saved?

(Select one)

In the Data Panel as an independent file
Internal to the design’s Manufacture workspace
On the computer’s local hard drive
Setup sheets aren’t saved, they constantly update with the design

Select an answer

What is the first step in creating a toolpath pattern?

(Select one)

Preselect the toolpaths to be patterned in the Browser
Preselect the WCS offset for the pattern
Preselect an axis of rotation from the Origin folder or from the part
Preselect the type of pattern

Select an answer

If a user notices that the simulation for a finishing Flow toolpath shows that the tool holder is colliding with the fixture, which of the following corrective actions should be taken?

(Select one)

Toggle Stock to Leave on and increase the Radial Stock to Leave value
Modify the Maximum Tilt value such that it no longer tilts to an angle that collides with the fixture
Switch the Isometric Direction to travel along the other axis
Reduce the tool diameter to increase the number of passes required

Select an answer

When creating a rotary position milling operation in a traditional 3+1 setup, which axis should be assigned to be the rotation axis for the part?

(Select one)

X-axis
Z-axis
Any axis can be selected because the toolpath will automatically select the axis that needs to be the rotation axis
Y-axis

Select an answer

For which of the following reasons should a fixture be defined in a machining Setup?

(Select one)

To provide collision checking during a toolpath simulation
To provide collision avoidance during toolpath generation
To generate simulation data about fixture strength
To automatically define all bottom heights for milling operations as the base of the fixture

Select an answer

When a new toolpath is created, where is the default origin for the Tool Orientation?

(Select one)

The center of mass of the part
The WCS origin of the Setup
The center of mass of the stock
The origin defined in the Design workspace

Select an answer

If an NC Program contains a pattern of operations and the user wants to post copies of all operations to different coordinate system locations on their machine within the same NC file, how can this be configured?

(Select one)

Create a linear pattern of all operations and override WCS
Use Multiple WCS offsets when configuring the Setup
Post the operations multiple times at different WCS locations and manually combine the code in the NC file
Create an NC program and manually enter the WCS offsets

Select an answer

What happens to a derived body when edits are made to the parent design?

(Select one)

Design updates to the parent do not affect the derived body
When a derived body is created, the parent design becomes read-only and cannot be modified
Design updates are pushed to the derived body automatically
Design updates to the parent automatically break the link on the derived body

Select an answer

Start your test

CAM Strategies for Multi-Axis Milling final test

Which of the following workflows can be used to modify the length of a sample tool in the Fusion 360 library?

How can a user obtain the most accurate information about the proper settings for sample machines in the Fusion 360 Machine Library?

For a part that requires multiple Setup configurations each with different WCS locations, what should be done to include all setups in a single NC Program?

One important advantage of creating a distributed design is:

Which of the following is the best use case for a Multi-Axis Swarf toolpath?

How does the Wrap Toolpath functionality work in a 2D Adaptive Clearing operation for a cylinder?

How can machining operations best be reorganized in the Browser?

What is the advantage of increasing the Forward Tilt for a Multi-Axis Contour operation?

Which of the following is true of tools in the Fusion 360 Sample library?

When defining stock in a new Setup, Fusion 360 creates default stock dimensions that are:

What does a WCS Offset of 2 indicate in an NC Program with a HAAS or FANUC controller?

When configuring a Multi-Axis Rotary operation, which Style of rotary passes will move the tool along the rotary axis to remove material?

How can design history be enabled in an imported model?

When setting up a workholding, what must be applied to replicate mechanical motion?

Which of the following is an option when using the Derive command?

Which of the following parameter values need to be modified for each Setup to be able to Post Process more than one CAM setup at a time?

Which of the following is a valid mode to select geometry for a Multi-Axis Swarf operation?

When simulating toolpaths in the Manufacture workspace, which Stock Colorization option will display a different color for the toolpath associated with each individual operation?

Before a tool can be created and stored in the cloud, which of the following must be done first?

Where can the NC Program command be found?

When creating a toolpath pattern for a set of rotary position operations on a machine with rapid tool changes and slow A-axis movement, which Operation Order should be selected in the Pattern dialog?

What is the purpose of a derived toolpath?

Where are Setup Sheets created from an NC Program saved?

What is the first step in creating a toolpath pattern?

If a user notices that the simulation for a finishing Flow toolpath shows that the tool holder is colliding with the fixture, which of the following corrective actions should be taken?

When creating a rotary position milling operation in a traditional 3+1 setup, which axis should be assigned to be the rotation axis for the part?

For which of the following reasons should a fixture be defined in a machining Setup?

When a new toolpath is created, where is the default origin for the Tool Orientation?

If an NC Program contains a pattern of operations and the user wants to post copies of all operations to different coordinate system locations on their machine within the same NC file, how can this be configured?

What happens to a derived body when edits are made to the parent design?