Learning

Certification

Certification overview

Architecture, Engineering & Construction

Design & Manufacturing

Media & Entertainment

Learning

Create Pier Model

Any referenced datasets can be downloaded from "Module downloads" in the module overview.

Lesson: Creating sketches using included parameters

In this lesson, we will develop a Pier component for InfraWorks using a file that has parameters preloaded.

Learning Objectives:

• Create a UCS controlled by parameter

• Develop a sketches using parameters

• Build 3D features from sketches

1. Open Hammerhead Pier Parameter Template.ipt file.

2. Orient the ViewCube So that the X Axis is to the right and the Z Axis is pointing up.

3. Set the ViewCube face to Front.

4. Set a Home View orientation looking at the top, left and front faces as well.

5. Expand the Origin folder in the browser and turn on the visibility of the planes, axes, and center point.

6. Start the UCS tool.

7. Set the X value to PierLateralOffset, the Y and X values to 0.

8. Turn on the Construction line option from the Format tab.

9. Draw a ~20in horizontal line above the model center point.

10. Draw another line from the model center point to the midpoint of the horizontal line.

11. Project the centerpoint of the UCS

12. Draw a vertical line from the centerpoint of the UCS toward the horizontal line.

13. Apply a Vertical constraint to the line drawn from the model centerpoint.

14. Add a dimension from the centerpoint to the horizontal line and use the List Parameter option to pick the PierHeightPlustVerticalAdjustment parameter.

15. Adjust the size and position of construction lines to fit the update scale of the model.

16. Sketch the profile of the Cap making the lines on the sides Vertical.

17. The top of the profile should be connected to the middle of the horizontal construction line.

18. Connect the bottom point to the line drawn from the UCS.

19. Right-click on the Back Skew feature and select Properties.

20. Create a Suppression rule that suppresses the feature if the value of the Skew2 parameter is equal to 0.

21. Use the List Parameters option or type the parameter names listed below to constrain the geometry.

22. Finish the Sketch and rename it in the browser to Cap Sketch.

23. Start the Extrude tool.

24. Extrude the profile symmetrically setting the Distance A value to PierCapThickness.

25. Begin a new sketch on the XZ plane of the part origin.

26. Project the centerpoint of the UCS into the sketch.

27. Add a horizontal line from the origin to the left a distance of PierColumnLeftWidth.

28. Add a horizontal line from the origin to the right a distance of PierColumnRightWidth.

29. Project the bottom edges of the Cap into the sketch.

30. Draw vertical lines from the endpoints of the column to the projected bottom of the Cap.

31. Add lines to cap the top of the column sketch.

32. Finish the sketch.v

33. Rename the sketch Column Sketch.

34. Start the Extrude tool and create a symmetrical body setting the Distance A value to PierColumnThickness.

35. Place a fillet with a Radius of FiletRadius on each side of the Column where the Column meets the Cap.

Was this information helpful?

______

Cookie preferences

Your privacy is important to us and so is an optimal experience. To help us customize information and build applications, we collect data about your use of this site.

May we collect and use your data?

Learn more about the Third Party Services we use and our Privacy Statement.

Strictly necessary – required for our site to work and to provide services to you

These cookies allow us to record your preferences or login information, respond to your requests or fulfill items in your shopping cart.

YES

Improve your experience – allows us to show you what is relevant to you

These cookies enable us to provide enhanced functionality and personalization. They may be set by us or by third party providers whose services we use to deliver information and experiences tailored to you. If you do not allow these cookies, some or all of these services may not be available for you.

YES

Customize your advertising – permits us to offer targeted advertising to you

These cookies collect data about you based on your activities and interests in order to show you relevant ads and to track effectiveness. By collecting this data, the ads you see will be more tailored to your interests. If you do not allow these cookies, you will experience less targeted advertising.

YES

Are you sure you want a less customized experience?

We can access your data only if you select "yes" for the categories on the previous screen. This lets us tailor our marketing so that it's more relevant for you. You can change your settings at any time by visiting our privacy statement

Your experience. Your choice.

We care about your privacy. The data we collect helps us understand how you use our products, what information you might be interested in, and what we can improve to make your engagement with Autodesk more rewarding.

May we collect and use your data to tailor your experience?

Explore the benefits of a customized experience by managing your privacy settings for this site or visit our Privacy Statement to learn more about your options.

Cookie preferences

Strictly necessary – required for our site to work and to provide services to you

Improve your experience – allows us to show you what is relevant to you

Customize your advertising – permits us to offer targeted advertising to you

THIRD PARTY SERVICES

Strictly necessary – required for our site to work and to provide services to you

Improve your experience – allows us to show you what is relevant to you

Customize your advertising – permits us to offer targeted advertising to you

Are you sure you want a less customized experience?

Your experience. Your choice.